Moto guzzi california wirring plugs and pins

These are some of the pictures of the wiring plugs from the original Moto Guzzi loom. The plug in the picture is off the headlamp which had cut wires and the pins were dirty. I cut all the wires to the same length, then fitted new pins and soldered them in aswell. This probably is over the top but to make a good connection seems a good idea.  I did make a mistake as the pins push into the plastic connector. I then had to cut the pins and pull them out. Make new connections and pushed home into the new connector. Now the bulbs have a new connector and hopefully the bulbs will work as they should. There are far too many stories of bad wiring from the Italian manufacturers.




Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s